瓦屋山水电站厂房区红层岩体古滑坡稳定性研究     

王子忠  许模  杨绍平 《工程地质学报》2011,19(2):213-218

红层岩体以其岩体结构的软硬相间及软弱夹层发育而在边坡稳定方面表现为"易滑地层".瓦屋山水电站厂房区边坡为顺向坡,砂岩类岩石与黏土岩类岩石呈缓倾、互层状(倾角10°～20°)产出.构造与表生改造作用下,在这两类软硬相间的岩石界面上常形成分布较为连续的软弱夹层,这类岩体较易沿软弱夹层产生顺层滑动.地质历史时期,瓦屋山厂房区...  相似文献   

海南石碌铁矿床构造变形特征及其与铁多金属成矿富集的关系   总被引：1，自引：0，他引：1  

许德如  吴俊  肖勇  陈福雄  王力  刘朝露  王智琳 《地质通报》2011,30(4):553-564

海南石碌铁矿曾被誉为“亚洲最大的富铁矿”,其形成、定位与褶皱变形及伴随的剪切、塑性流动等构造密切相关。石碌矿区构造变形大致分为早期(D1)复式向斜的形成时期、晚期(D2)褶皱叠加和剪切变形时期。后者又进一步分为韧-脆性变形(D2a),脆-韧性变形、层间滑脱断层形成(D2b)和脆性变形、矿体破坏(D2c)3个阶段。石碌铁矿床受NW—SE向复式向斜及其与NE—NNE向褶皱叠加所形成的横跨或斜跨褶皱的严格控制;褶皱过程所伴随的剪切变形和高温塑性流动是富铁矿形成的重要机制。复式向斜轴部,尤其是2期向斜褶皱轴的叠加部位往往可发现厚大的富铁矿体。  相似文献   

Application of a BEM time stepping algorithm in understanding complex unsteady propulsion hydrodynamic phenomena     

Gerasimos K. Politis 《Ocean Engineering》2011,38(4):699-711

We solve the problem of unsteady potential flow around a system of arbitrarily moving rigid or flexible, lifting or non-lifting bodies, in an infinite fluid free of distributed vorticity. For the solution we use a time stepping algorithm and a potential based formulation of the corresponding free BVP. Nonlinear free shear layer dynamics are included in our modeling. This is a major innovation in treating complex unsteady propulsion problems since no simplifying assumptions (like that of a helicoidal wake) are used regarding the wake model. Bilinear quadrilateral elements are used to describe body and shear layer geometry at each time t. Three types of Kutta conditions can be alternatively applied for the determination of the shed vorticity from lifting bodies. The theoretical and numerical aspects of the method are presented followed by a number of applications, elucidating the qualitative and quantitative physical characteristics of a number of complex unsteady propulsion problems.  相似文献   

Postbuckling of shear deformable stiffened anisotropic laminated cylindrical shell under axial compression     

Zhi-Min Li  De-Qing Yang 《Ocean Engineering》2011,38(10):1246-1255

A postbuckling analysis is presented for a shear deformable anisotropic laminated cylindrical shell with stiffener of finite length subjected to axial compression. The material of each layer of the shell is assumed to be linearly elastic, anisotropic and fiber-reinforced. The governing equations are based on a higher order shear deformation shell theory with von Kármán-Donnell-type of kinematic nonlinearity and including the extension/twist, extension/flexural and flexural/twist couplings. The ‘smeared stiffener’ approach is adopted for the beam stiffeners. This arrangement allows the beam stiffeners to be assembled directly into the global stiffness matrix. The nonlinear prebuckling deformations and initial geometric imperfections of the shell are both taken into account. A singular perturbation technique is employed to determine the buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling response of perfect and imperfect, grid, axial, ring stiffened, and unstiffened shells. The results confirm that there exists a compressive stress along with an associate shear stress and twisting when the anisotropic shell is subjected to axial compression. The postbuckling equilibrium path is unstable for the moderately thick cylindrical shell under axial compression and the stiffened shell structure is imperfection-sensitive.  相似文献   

Measurement and modeling of bed shear stress under solitary waves   总被引：1，自引：0，他引：1  

Jaya Kumar Seelam  Paul A. Guard  Tom E. Baldock 《Coastal Engineering》2011

Direct measurements of bed shear stresses (using a shear cell apparatus) generated by non-breaking solitary waves are presented. The measurements were carried out over a smooth bed in laminar and transitional flow regimes (~ 10⁴ < R_e < ~ 10⁵). Measurements were carried out where the wave height to water depth (h/d) ratio varied between 0.12 and 0.68; maximum near bed velocity varied between 0.16 m/s and 0.51 m/s and the maximum total shear stress (sum of skin shear stress and Froude–Krylov force) varied between 0.386 Pa and 2.06 Pa. The total stress is important in determining the stability of submarine sediment and in sheet flow regimes. Analytical modeling was carried out to predict total and skin shear stresses using convolution integration methods forced with the free stream velocity and incorporating a range of eddy viscosity models. Wave friction factors were estimated from skin shear stress at different instances over the wave (viz., time of maximum positive total shear stress, maximum skin shear stress and at the time of maximum velocity) using both the maximum velocity and the instantaneous velocity at that phase of the wave cycle. Similarly, force coefficients obtained from total stress were estimated at time of maximum positive and negative total stress and at maximum velocity. Maximum positive total shear stress was approximately 1.5 times larger than minimum negative total stress. Modeled and measured positive bed shear stresses are well correlated using the best convolution model, but the model underestimates the data by about 4%. Friction factors are dependent on the choice of normalizing using the maximum velocity, as is conventional, or the instantaneous velocity. These differ because the stress is not in phase with the velocity in general. Friction factors are consistent with previous data for monochromatic waves, and vary inversely with the square-root of the Reynolds number. The total shear stress leads the free stream fluid velocity by approximately 50°, whereas the skin friction shear stress leads by about 30°, which is similar to that reported by earlier researchers.  相似文献   

静力触探技术在东海陆架工程勘察中的应用研究     

陈培雄  刘奎  吕小飞  李冬  王振红 《海洋学研究》2011,29(4):71-76

通过对东海大陆架海底浅表层土样的静力触探参数进行统计分析,得到该区域细砂、粘土、淤泥质土和淤泥的静力触探统计值,建立了研究海区基于静力触探参数的土类判别图,可用于快速判定土的类别.根据静力触探参数,并应用经验公式估算了海底粘性土的抗剪强度和灵敏度,对估算公式经验系数选择进行了深入研究,提出在研究海区应用经验公式进行粘性...  相似文献   

鄂尔多斯盆地南部直罗油田长8油层油气沸腾包裹体群研究   总被引：1，自引：0，他引：1  

王志辉  黄伟 《地球科学与环境学报》2011,33(2):146-151

运用激光拉曼光谱、包裹体充填度测定等方法对鄂尔多斯盆地直罗油田富南3井、6井长8油层裂缝岩芯充填物中包裹体群进行分析,发现富南3井、6井与英旺油田英16井长8油层中油气沸腾包裹体群完全相同,密集分布的气泡不停晃动,证实油气沸腾包裹体群不是孤立的、偶然的地质现象。富南3井、6井和英16井长8油层裂缝岩芯的原始裂缝性质为滑动-剪切裂缝和剪切裂缝,在区域构造的作用下,反复发生拉张-挤压交替活动;在拉张发生的瞬间,与裂缝沟通的油层里的原油发生减压沸腾,原油中的轻质馏分和其他流体进入裂缝空间;在随后的挤压发生时,裂缝基本封闭,一部分流体返回原来的油层,一部分被挤到别的裂隙空间形成新的油藏;残留在裂缝里的碳酸钙,在较高的地层压力下逐渐结晶,并把残留的轻质馏分包裹,形成油气包裹体;这些油气包裹体形成压力较高,又包裹着成分类似液化气的轻质馏分,在常温常压下就处于沸腾状态;这样的过程反复进行,在裂缝充填物中形成了沿着晶体生长线以及成片、成带分布的油气沸腾包裹体群。上述油气沸腾包裹体群的形成过程就是油气的地震泵运移机制,丰富了油气运移地震泵地质模型。  相似文献   

基于细化分层法探讨面波频散曲线反演参数的简化     

邵广周  李庆春 《地球科学与环境学报》2011,(3):317-320

常规频散曲线反演过程中需要不停地改变分层数、层厚度和层速度等参数,实现过程相对繁琐,而采用细化分层法对反演参数进行简化则避免了上述缺点。具体思路为:根据目的层探测深度(如20m)将地下介质分为若干个(20个)厚度为1m的薄层和1个均匀半空间层(共21层),这样在反演中分层数和层厚度均为已知参量,反演过程只需修改速度参数即可,避免了改变分层数和层厚度等参数,显著简化了反演计算过程。正演计算和反演结果均表明:细化分层与实际分层计算出的频散曲线是等效的,细化分层反演结果的总体效果与真实模型非常接近,这说明细化分层方法用于频散曲线反演是切实可行且有效的;将地下介质划分为1m厚的薄层,反演后每层均可得到1个横波速度,能满足反演分辨率的要求;由于实际地下介质的速度是随深度渐变的,细化分层后比按频散曲线拐点分层(每分层的厚度可能是几米或几十米,同一分层内介质的横波速度相等)更接近实际情况。  相似文献   

一种模拟韧性剪切带中椭球状标志体运动、变形的新方法     

刘稳航  李玮  董云鹏  屈梦梦  杨源祯 《地质通报》2015,34(10):1897-1909

韧性剪切带中赋存的椭球状应变标志体(砾石、碎斑等)是研究剪切带运动学、动力学的重要应变标志体。传统研究中椭球状标志体通过对野外露头的观测或与实验岩石学结合,判断剪切带运动方向、探讨运动学和流变学特征。随着数值模拟技术在韧性剪切带中的引入和推广,国内外许多学者试图恢复椭球状标志体的运动轨迹和变形特征,并取得了显著的成果。然而,国内文献对于模拟韧性剪切带椭球状标志体的定量及模拟研究甚少,研究方法也鲜为介绍。基于此,针对韧性剪切带中椭球状标志体变形的最新研究进展,详细介绍建立在Jeffery理论和Eshelby理论之上的数值模拟思路和方法,并利用Mathcad软件模拟了给定条件下的椭球状标志体的运动轨迹、变形特征。  相似文献   

甘肃滴水山金矿地质地球化学特征及找矿标志          下载免费PDF全文

王学银  何平平 《甘肃地质》2015,24(3):58-62

滴水山金矿位于北祁连加里东褶皱带西北边缘,矿床受控于近EW向展布的韧性剪切带中,并与NE向的阿尔金断裂组成"λ"字型构造。通过岩屑测量共圈定12个化探综合异常,其中AR1、AR2和Au8化探综合异常走向呈近EW向,元素组合为Au、Ag、Cu、Pb、As、Sb、Hg等,各元素异常衬度和规模较大,且分带明显,具有较好的找矿前景。经后期工程揭露,发现了有价值的金矿体,总结了找矿方法和找矿标志。根据矿床地质特征认为该矿床为火山岩区脆-韧性剪切带型构造蚀变岩型金矿床。  相似文献